MINI MCR-SL-RPS-I-I-SP

https://www.phoenixcontact.com/us/products/2864752 Repeater power supply - MINI MCR-SL-RPS-I-I-SP - 2864752 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR repeater power supplies, spring-cage connection, input signal: (0)4..20 mA, output signal: (0)4..20 mA The figure shows a version with a screw connection Product Features  Power supply possible via the foot element (TBUS)  Can also be used as an isolator without supply  3-way isolation  Supply of 2-wire and passive 3-wire sensors  Highly-compact repeater power supplies for electrical isolation, amplification, and filtering of standard analog signals         Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 65.1 GRM Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 93.1 mm Depth 102.5 mm 10/10/2014   Page 1 / 8 https://www.phoenixcontact.com/us/products/2864752 Repeater power supply - MINI MCR-SL-RPS-I-I-SP - 2864752 Technical data Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection IP20 Input data Description of the input Current input (sensor circuit) Current input signal 4 mA ... 20 mA (repeater power supply and isolator operation) 0 mA ... 20 mA (isolator operation) Max. input current 28 mA Input resistance current input approx. 50 Ω Transmitter supply voltage UB - max. 4.5 V for load 0 mA ... 20 mA Transmitter supply voltage range 14.7 V DC ... 25.5 V DC Output data Output name Current output Current output signal 4 mA ... 20 mA (repeater power supply and isolator operation) 0 mA ... 20 mA (isolator operation) Max. output current 28 mA Load/output load current output ≤ 500 Ω (at I = 20 mA) Transmission Behavior 1:1 to input signal Power supply Nominal supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) Power consumption < 900 mW (at 24 V DC and in repeater power supply operation) < 600 mW (at 24 V DC and in isolator operation) Connection data Connection method Spring-cage connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Stripping length 8 mm General No. of channels 1 10/10/2014   Page 2 / 8 https://www.phoenixcontact.com/us/products/2864752 Repeater power supply - MINI MCR-SL-RPS-I-I-SP - 2864752 Technical data General Maximum transmission error ≤ 0.2 % (of final value) Transmission error, typical ≤ 0.1 % (of final value) Maximum temperature coefficient < 0.01 %/K Temperature coefficient, typical < 0.002 %/K Limit frequency (3 dB) approx. 100 Hz Step response (10-90%) approx. 3.5 ms Protective circuit Transient protection Electrical isolation Basic insulation according to EN 61010 Surge voltage category II Pollution degree 2 Rated insulation voltage 50 V AC/DC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 50081-2 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green Housing material PBT Mounting position any Assembly instructions To bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715. Conformance CE-compliant ATEX  II 3 G Ex nA IIC T4 Gc X UL, USA / Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T5 GL GL EMC 2 D EMC data Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 10 % Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 10 % Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 10 % 10/10/2014   Page 3 / 8 https://www.phoenixcontact.com/us/products/2864752 Repeater power supply - MINI MCR-SL-RPS-I-I-SP - 2864752 Classifications eCl@ss eCl@ss 4.0 27210120 eCl@ss 4.1 27210120 eCl@ss 5.0 27210120 eCl@ss 5.1 27210120 eCl@ss 6.0 27210120 eCl@ss 7.0 27210120 eCl@ss 8.0 27210120 ETIM ETIM 2.0 EC001485 ETIM 3.0 EC001485 ETIM 4.0 EC001485 ETIM 5.0 EC001485 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals UL Recognized / cUL Recognized / GL / cULus Recognized Ex Approvals UL Listed / cUL Listed / ATEX / cUL Listed / cULus Listed / cULus Listed Approvals submitted Approval details 10/10/2014   Page 4 / 8 https://www.phoenixcontact.com/us/products/2864752 Repeater power supply - MINI MCR-SL-RPS-I-I-SP - 2864752 Approvals UL Recognized  cUL Recognized  GL  cULus Recognized  Accessories Accessories DIN rail connector DIN rail connector - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.     Marking material Transparent cover - MINI MCR DKL - 2308111 Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm     10/10/2014   Page 5 / 8 https://www.phoenixcontact.com/us/products/2864752 Repeater power supply - MINI MCR-SL-RPS-I-I-SP - 2864752 Accessories Marking label - MINI MCR-DKL-LABEL - 2810272 Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL     Power module Power terminal block - MINI MCR-SL-PTB - 2864134 MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with screw connection, maximum current consumption of up to 2 A     Power terminal block - MINI MCR-SL-PTB-SP - 2864147 MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with spring-cage connection, maximum current consumption of up to 2 A     Power supply Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983 Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A     Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653 Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the potentially explosive area     10/10/2014   Page 6 / 8 https://www.phoenixcontact.com/us/products/2864752 Repeater power supply - MINI MCR-SL-RPS-I-I-SP - 2864752 Accessories System adapter System adapter - MINI MCR-SL-V8-FLK 16-A - 2811268 Eight MINI analog signal converters with screw connection method can be connected to a control system using a system adapter and system cabling with a minimum of wiring and very low error risk.     Drawings Application drawing Application drawing Sensor 4...20mA 1 PWR OUT 2 GND1 3 4 IN I GND1 OUT I 5 1 UB GND2 2 6 Control system UB + GND3 GND1 3 7 GND1 4 8 24V MINI MCR-SL-RPS-I-I IN I PWR OUT OUT I 5 GND2 6 UB + Control system 7 GND3 8 24V MINI MCR-SL-RPS-I-I Mains voltage Mains voltage Repeater power supply operation with a passive sensor Isolator operation with an active sensor Application drawing Block diagram OUT I Actuator OUT IN Sensor / Field 1 – 1 IN I 2 IN I PWR OUT OUT I PWR 2 IN 5 GND2 UB Control system 4 GND1 GND1 UB + GND3 MINI MCR-SL-RPS-I-I + 2 PWR OUT 5 + 5 passive GND 2 6 6 – OUT I 6 3-wire 3 OUT I active 2-wire 1 PLC / DCS 7 1 PWR 2 IN 3 GND OUT I 8 24V US – 3 – 4 GND 1 +24V GND 1 7 + GND 3 8 – 1 4-wire GND 3 +24V GND 3 Mains voltage Zone 2 Div. 2 Isolator operation at the analog output module 10/10/2014   Page 7 / 8 https://www.phoenixcontact.com/us/products/2864752 Repeater power supply - MINI MCR-SL-RPS-I-I-SP - 2864752 Dimensioned drawing 6,2 102,5 93,1 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 8 / 8